|
Hairbone Creations
UNDER CONSTRUCTION PLEASE BE PATIENT
Different and Just Awesome! This beautiful hairbone choker is made of white bone, Val Verde turquoise, sterling silver beads, and topped off with a centerpiece of antler and turquoise. All the white melon shaped beads are bone, most likely cow. The round silver beads are 7mm sterling silver, and the hair bone beads are 1 and 1 1/2" long. The sliced antler centerpiece is 1 1/2" x 2 3/4". The turquoise nuggets are as follows; top one is Sleeping Beauty Turquoise and measures about 1 1/4" x 3/4", bottom one is kingman turquoise and 1" x 1/2". There are two bone separated beads that are 1 1/8" x 1/4" x 1/8". The nuggets of turquoise between the white bones are Val Verde and are 10-12mm. The necklace is 26" long, (which includes the ties), with a 4" tail. The actual design is about 16" long. This can be worn tied tight or loosely around the neck. There is a pinch clasp of sterling silver and turquoise as well as the tie. All silver is sterling silver, all stones genuine. This was strung with artificial sinew. There is a 5 x 7mm signature tag with the signature "Thunderbird Creations" engraved on it. Absolutely stunning! #2739 $95.00 SOLD
Go Native with Style! This beautiful hair bone style choker is made of sterling silver melon shaped beads and turquoise. It can be worn three to four different ways. Works great as a choker with either side showing. Or wear is as a necklace draping down from the neck, and once again, with either side showing. All the 3/4" x 1/4" melon shaped beads are sterling silver. The turquoise squares are about 3/4", the separator bars are 3/4" x 1/8", and the silver beads are mainly 4mm with 7 and 8mm at the ends. The necklace can be anywhere from 15 3/4" to 19 1/2" long, depending on where you hook the expansion chain. It is about 1" wide, and all silver is sterling silver, all stones genuine. There is a 4 x 7mm tag of sterling silver engraved with the signature Thunderbird Creations. Absolutely stunning! #2599 $240.00
This beautiful hair bone style choker is made of bone. All the 1" white beads and spacer bars are cow bone. The white bone separator bars are about 1 1/4" x 1/4". The 1/4" beads are brass. The braided sinew ties on each side are about 4 1/2" long. The choker necklace is a total length of 22 1/2" long, including the ties, and about 1 1/4" wide. The bone and bead design is 13 1/2" long. It was hand strung with artificial sinew. There is a 4 x 7mm sterling silver tag at the end, (not shown), that is engraved with the signature Thunderbird Creations. #2901 $40.00
This beautiful hair bone style choker is made of antler and bone. All the 1" white beads and spacer bars are cow bone. The white bone separator bars are about 1 1/4" x 1/4". The sliced antler centerpiece is a rough 1 1/2-1 3/4" diameter circle. The braided sinew ties on each side are about 5" long. The choker necklace is a total length of 27" long, including the ties, and about 1 1/4" wide. The bone and bead design is 15" long. It was hand strung with artificial sinew. There is a 4 x 7mm sterling silver tag at the end that is engraved with the signature Thunderbird Creations. #2778 $35.00
This beautiful hair bone style choker is made of abalone, cowhorn and bone. All the 1 1/2" black beads are cowhorn, and the spacer bars are cow bone. The black bone separator bars are about 1 1/4" x 1/4", and have been dyed. The abalone centerpiece is a 1 1/4" diameter circle. The braided sinew ties on each side are about 7" long. The choker necklace is a total length of 28" long, including the ties, and about 1 1/4" wide. The horn and bead design is 15 1/2" long. It was hand strung with artificial sinew. There is a 4 x 7mm sterling silver tag at the end that is engraved with the signature Thunderbird Creations. #2780 $35.00
PLEASE NOTE: Most items are one of a kind and may be sold. Pages are monitored hourly and changes are made as soon as possible. In the event of a double sell, the second buyer will have their money refunded, or if possible, the item will be made to order. Thanks, Terry
|